Skip to main content
    Standing Seam Metal — Dark Bronze
    Metal Roofing Highlands, NC

    Standing Seam Metal — Dark Bronze

    3,200 sq ft roof replacement 8 days 4,118 ft elevation
    The Outcome

    Custom-fabricated panels for 12/12 pitch

    "The completed installation transformed the property's curb appeal and eliminated the chronic leak issues. The 24-gauge Kynar 500 panels carry a manufacturer color warranty and are engineered for the UV intensity and temperature swings at 4,100 feet. The homeowner reported zero issues through their first full winter season."

    "We've used Highlander for two properties now. Their standing seam metal work is exceptional and they genuinely understand the mountain climate challenges. Five stars every time."

    Linda K.Cashiers, NC
    Project Scope

    The Work at a Glance

    Scope details for Standing Seam Metal — Dark Bronze
    LocationHighlands, NC
    CountyMacon County
    Elevation4,118 ft
    ServiceMetal Roofing
    Scope3,200 sq ft roof replacement
    Duration8 days
    Work Performed
    • Complete tear-off of existing metal roofing system
    • Full deck inspection and repair of damaged sheathing
    • Installation of high-temp ice & water shield on all valleys and eaves
    • Custom-fabricated 24-gauge standing seam panels in Dark Bronze
    • Precision trim work on 8 gable intersections
    • Ridge vent installation for improved attic ventilation
    • Copper accent details on ridge caps
    Highlands, NC

    We do this work in Highlands — request a scope

    Same crews, same standard. We'll look at your metal roofing project in person and put the scope, materials, and timing in writing before anything starts.

    • 4.9★ Google · 150+ reviews
    • Licensed & insured · family-owned since 2017
    • Franklin-based crews serving Highlands
    Project Summary

    Inside the Project

    A complex multi-gable standing seam metal roof replacement on a mountain estate in Highlands. The steep 12/12 pitch and multiple roof intersections required custom-fabricated panels and precision installation by our most experienced metal crew.

    The Challenge

    Mountain Conditions & Technical Hurdles

    The existing roof had suffered years of accelerated wear from Highlands' extreme UV exposure and freeze-thaw cycles at 4,100+ feet. Multiple prior patch repairs had compromised flashing integrity, and the complex gable geometry demanded custom panel fabrication for every intersection.

    Materials & Systems

    What We Used

    24-Gauge Standing Seam Panels

    Dark Bronze Kynar 500 finish — manufacturer color warranty

    Grace Ice & Water Shield

    High-temp underlayment on valleys, eaves, and penetrations

    Custom Ridge Caps

    Fabricated on-site for seamless geometry matching

    Copper Accent Details

    Ridge cap accents for premium visual finish

    Process Highlights

    Execution & Quality Control

    01

    Pre-project drone survey to map all roof intersections and panel measurements

    02

    Custom panel fabrication at our shop — eliminating on-site cutting waste

    03

    Staggered installation sequence to maintain weather protection throughout

    04

    Daily photo documentation shared with homeowner

    05

    Final drone inspection to verify every panel seam and flashing detail

    Project Details

    CountyMacon County
    Elevation4,118 ft
    Scope3,200 sq ft roof replacement
    Duration8 days
    Categoryroofing

    Why Highlander

    Licensed NC General Contractor
    CertainTeed ShingleMaster Credentialed Contractor
    Fully Insured — Liability & WC
    In-House Crews Only
    Rapid Response Time
    Written Scope on Every Project

    Want Results Like This?

    Schedule a consultation in Highlands, NC and let's discuss your project.

    Get My Project Scoped
    Before & After

    The Transformation

    Drag the slider to compare. Every detail represents hours of careful planning and precise execution.

    24-Gauge Standing Seam — Dark Bronze
    Worn Metal — Patched & Leaking
    Worn Metal — Patched & Leaking
    24-Gauge Standing Seam — Dark Bronze

    What Changed

    Complete removal of deteriorated metal roofing with multiple failed patch repairs. Replaced with custom-fabricated 24-gauge standing seam panels, new underlayment system, and precision-fitted trim on all 8 gable intersections.

    Why It Mattered

    The existing roof was leaking at multiple points, causing interior damage and compromising the home's envelope integrity at 4,100 feet elevation. Every winter freeze-thaw cycle worsened the problem.

    The Highlander Difference

    Custom panel fabrication eliminated field-cutting waste and ensured precision fit. Pre-project drone survey mapped every intersection. Staggered installation maintained weather protection throughout the 8-day project.

    Inspired by this project?

    Let's discuss how we can deliver the same level of quality for your property.

    Get My Project Scoped

    Serving Highlands, NC and Macon County

    We've completed numerous projects in this area. Our crews understand the local building codes, elevation challenges, and weather patterns unique to this part of Western North Carolina.

    View Local Service Page
    Project Gallery

    More From This Project

    Standing Seam Metal — Dark Bronze — view 1
    Standing Seam Metal — Dark Bronze — view 2
    Standing Seam Metal — Dark Bronze — view 3
    Standing Seam Metal — Dark Bronze — view 4

    Your Project Could Be Our Next Showcase.

    Schedule a consultation and let's discuss what's possible for your property.

    Licensed & InsuredCertainTeed ShingleMaster Credentialed ContractorIn-House CrewsWNC Specialists